Using an MSA30 SB (302969-B21) with an IBM x345

[Andrew Sinclair]

I have an MSA30 SB (302969-B21) and would like to connect it to the ServeRAID-6i+ Controller (13N2190) of an IBM x345 server.
Both the MSA30 and the ServeRAID-6i+ are Ultra320 SCSI.

Are there any issues with this configuration I should be concerned about?

[Greg Carlson]

Definately is untested so the results will be unknown. I would be more concerned about trying to hook up the MSA20 with SATA drives and SCSI interface with your config. Should work, but will be unsupported.

[Andrew Sinclair]

The enclosure is an MSA30 SB (single bus). The drives are 146 GB U320 drives (not SATA).

[John Kufrovich]

It may work. My only concern is the event handling.

[Andrew Sinclair]

Would we need to load the HP MIBs into IBM Director (the IBM SNMP trap destination)?

[msa20]

i am using msa20 and ibm x345...
how can i do that?