HPE Community
Disk Enclosures
1753310 Members
6450 Online
108792 Solutions
New Discussion

Using rp5405 internal disks in a DS2300?

 
Sam Nicholls_1
Occasional Contributor

‎07-21-2003 11:11 AM

‎07-21-2003 11:11 AM

Using rp5405 internal disks in a DS2300?

A disk upgrade on our rp5405 servers has left us with several 36GB 15K internal disk modules (A6846A).

Can these disks be used in a DS2100 or DS2300? The only visible difference is the internal disks don't have the same quick-release handle as the DS2300 disks.

If they cannot be used in the DS???? arrays, is there any other type of enclosure that they can be used with.

thanks,
-sam
0 Kudos
Reply
1 REPLY 1
Oleg Khoroshylov
Frequent Advisor

‎07-22-2003 05:50 AM

‎07-22-2003 05:50 AM

Re: Using rp5405 internal disks in a DS2300?

Sam,

Difference is form-factor: disks for rp5405 are half-height (HH), disks for DSXXXX enclosure are low-profile (LP).

BR,
OK
No RISC, no fun
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.