Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

VA problem error

bitou
Frequent Advisor

VA problem error

Hi,
I have a message error when i try to add a new HD in the enclosure.
I have received an error on the command view "WARNING: The configuration of the subsystem is such that one or more drives has only a single path of access to it"
any help to solve this issue.

 

 

P.S. This thread has been moved from General to Disk array. - Hp Forum Moderator

7 REPLIES
Torsten.
Acclaimed Contributor

Re: VA problem error

>> "WARNING: The configuration of the subsystem is such that one or more drives has only a single path of access to it"

You should start with a "armdsp -a " and investigate who is the culprit ...

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
hvhari
HPE Pro

Re: VA problem error

hi , were you able to get the output requested Torsten in previous post?
Regards,
Hari

If this post was useful , click the Kudos Star on the left side to say Thanks!
bitou
Frequent Advisor

Re: VA problem error

when i execute armdsp -a alias command, i have received:

ARRAY INFORMATION

Array Status:_________________________Warning
Firmware Revision:____________________38370HP17P0829021443
Product Revision:_____________________HP17
Last Event Log Entry for Page 1:______56649
LUN SETTINGS

LUN Creation Limit:___________________1024
Maximum LUN Creation Limit:___________1024
Migrating Write Destination:__________False

SCRUB SETTINGS

Scrub Restart Period:_________________7190 minutes
Scrub State:__________________________Stopped, host activity detected

OPERATIONS IN PROGRESS
.
.
.
.
WARNINGS

WARNING: The configuration of the subsystem is such that one or more drives has only a single path of access to it.
hvhari
HPE Pro

Re: VA problem error

need to look in the complete log to understand the origin of this warning. could you attach it to the post? (error could be anywhere on disks, controller or JBODs.)
Regards,
Hari

If this post was useful , click the Kudos Star on the left side to say Thanks!
Torsten.
Acclaimed Contributor

Re: VA problem error

The full armdsp -a alias would be more helpful.

add


armdsp -t alias

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
PDP-Fan
Regular Advisor

Re: VA problem error

There are single path and dual path (DP) drives.... do you have the right one?

***********************************************
"If it seems illogical... you just don't have enough information"
Torsten.
Acclaimed Contributor

Re: VA problem error

# armdsp -t <alias>

 

will help!


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!