Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

VA7100 - WARNING STATE - Device CLAIMED in HP-UX11.11 but no connection via cvui

SOLVED
Go to solution
Cresswell Williams
Frequent Advisor

VA7100 - WARNING STATE - Device CLAIMED in HP-UX11.11 but no connection via cvui

Hi Experts

I have a VA7100, with no data on it. I started it up, and connected to it via a serial cable, and it went directly into the WARNING STATE prompt.

I did an ioscan -fn from my HP-UX11.11 L-class server, and it picks up the array (CLAIMED), but I can still not connect to the va through cvui. Any suggestions?

Cresswell
2 REPLIES
Torsten.
Acclaimed Contributor
Solution

Re: VA7100 - WARNING STATE - Device CLAIMED in HP-UX11.11 but no connection via cvui

From the CLI run
dsp -s

to get more information about the status.

What do you get if you run from the host

# armdiscover

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Cresswell Williams
Frequent Advisor

Re: VA7100 - WARNING STATE - Device CLAIMED in HP-UX11.11 but no connection via cvui

Thanks for your reply. armdiscover worked!!
My inexperience in va's is really showing.

Thanks once again