HPE Community
Disk Enclosures
1752590 Members
2838 Online
108788 Solutions
New Discussion юеВ

Re: Virtual Array 2100

 
SOLVED
Go to solution
Jesus Alonso
Occasional Contributor

тАО04-15-2004 04:56 AM

тАО04-15-2004 04:56 AM

Virtual Array 2100

I have a virtual array 2100 with raid 5 , on hpux 11.0 , and 1 of the 6 hdd isn't working any more, how do i know if there is no quorum configuration in the VA, so i can just remove the faulty hdd and put the new one?

thanks
Jesus Alonso
0 Kudos
Reply
3 REPLIES 3
Karthik S S
Honored Contributor

тАО04-15-2004 08:03 PM

тАО04-15-2004 08:03 PM

Re: Virtual Array 2100

I think you are referring to DS2100 JBOD. DS2100 is not a virtual array and it does not support hardware RAID. If you have configured RAID 5 from the OS then it is fine. Just replace the faulty disk with the new one.

http://www.hp.com/products1/storage/products/disk_arrays/disksystems/ds2100/infolibrary/ds2100.pdf

-Karthik S S
For a list of all the ways technology has failed to improve the quality of life, please press three. - Alice Kahn
0 Kudos
Reply
Ted Buis
Honored Contributor

тАО04-16-2004 01:23 AM

тАО04-16-2004 01:23 AM

Solution

Re: Virtual Array 2100

The DS2100 is JBOD as previously noted, but only has four drives. Do you mean the VA7100 disk array? Five is the minimum number of drives for that unit. I suggest following instructions. You should be able to find the manual through www.docs.hp.com
Mom 6
Reply
Jesus Alonso
Occasional Contributor

тАО04-16-2004 03:32 AM

тАО04-16-2004 03:32 AM

Re: Virtual Array 2100

It's a VA7100 and i already did change the disk, it rebuilded it self in about 2 hrs.

Thanks all of you.

Jesus.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.