Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

adding hot spare.

Darren Poh_1
Frequent Advisor

adding hot spare.

Previously, a hot spare disk was rmoved and we deleted the LUN so that we can change the 2 faulty disks in the LUN with Raid 5. So after the replacement of 2 disks, I wanted to add the hot spare back, do I need to change any configuration??
3 REPLIES
Mark Poeschl_2
Honored Contributor

Re: adding hot spare.

What type of storage array and what version of firmware? In some types of arrays volumes are laid out on the physical spindles in a certain way to optimize performance so if you have one of those you MAY want to return things to the original configuration. This is not required by any means, but if you're careful you should be able to do it with zero downtime.
Darren Poh_1
Frequent Advisor

Re: adding hot spare.

thanks problem solved..
Nguyen Anh Tien
Honored Contributor

Re: adding hot spare.

Hi Darren
DO NOT FORGET TO ASSIGN POINT TO SOLUTION
TIENNA
HP is simple