Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

autoraid 12H problem

SOLVED
Go to solution
Lee Tae-kyung
Regular Advisor

autoraid 12H problem

The Disk of A3 slot is failed.
The disk of A3 slot had been failed ago...
I wonder if a Disk really problem.
Please help me...
I think I am a specialist in IT Korea^^. I am a programmer and SE and DBA
2 REPLIES
Mark van Hassel
Respected Contributor
Solution

Re: autoraid 12H problem

Hi,

You could try to pull the disk out and then put the disk back in again. In the past HP has had some problems with the connectors. Also you could let an engineer check the connector in that disk slot if the disk in the same slot is failing over and over again.

Good Luck,

Mark
The surest sign that life exists elsewhere in the universe is that none of it has tried to contact us
Steve Labar
Valued Contributor

Re: autoraid 12H problem

Try using command
arraylog -d {slot id} {array id}
this will give you specific information about the disk, including any error states.

Good Luck

Steve