brocade 2800 silkworm login

[chris_567]

I have a question about how to long in on a 2800? Ive tried admin/password,admin/admin,root/password Question is ,is there a way to reset it to standard setting or is there a differant logins that im missing.Ive tried to telnet it too by setting the ip and sub net address
Thanks alot,
Chris

[Uwe Zessin]

Chris,
from what I have heard you have to call the vendor in case you don't know the password. There should also be a 'factory' account, but that password must also be updated since the last round of firmware updates.

[Ray Ball]

I believe you have to contact Brocade directly and furnish some proof that you ought to have access to the switch. They have to send you special firmware to load into the switch, since there's no backdoor magic password for folks who lose the passwords.

Good luck.

[aliasgar]

Chris,

Can u try login it as, i think the default login account is admin and password is passwd or password.

login: admin
password :passwd /password .

Regards,
Aliasgar.