HPE Community
Disk Enclosures
1753971 Members
7870 Online
108811 Solutions
New Discussion юеВ

change disk controller id

 
Chourak
Occasional Contributor

тАО09-03-2010 11:48 AM

тАО09-03-2010 11:48 AM

change disk controller id

here is my problem: i have a FC60 disk array and 2 servers: form the first servers the disks are seen as c7tYdZ, from the second server the same disks are seen as c10tYdZ.
=> I would like to change the c10tYdZ to c7tYdZ on the second server

how to do this?
0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

тАО09-03-2010 08:22 PM

тАО09-03-2010 08:22 PM

Re: change disk controller id

There are many threads about this here - keyword "ioinit".

Why do you need this?

Normally it doesn't matter at all.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Chourak
Occasional Contributor

тАО09-04-2010 02:09 AM

тАО09-04-2010 02:09 AM

Re: change disk controller id

thank you. I need it because it will be easier to maintain the servers and the disk array and to write procedure and document. They will be no confusion.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.