Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

change disk controller id

Chourak
Occasional Contributor

change disk controller id

here is my problem: i have a FC60 disk array and 2 servers: form the first servers the disks are seen as c7tYdZ, from the second server the same disks are seen as c10tYdZ.
=> I would like to change the c10tYdZ to c7tYdZ on the second server

how to do this?
2 REPLIES
Torsten.
Acclaimed Contributor

Re: change disk controller id

There are many threads about this here - keyword "ioinit".

Why do you need this?

Normally it doesn't matter at all.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Chourak
Occasional Contributor

Re: change disk controller id

thank you. I need it because it will be easier to maintain the servers and the disk array and to write procedure and document. They will be no confusion.