Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

compaq storageworks

Mr Alan WARD
Occasional Contributor

compaq storageworks

when i attach a storageworks raid array 7000 to either a K class or a N class .
Running hp ux v 11.00 64 bit .
if i do an ioscan -fnC disk i can see all of the disks
however when i go into sam i can only see disks at lun 0 .
1 REPLY
David Bell_1
Honored Contributor

Re: compaq storageworks

Alan,

With the VA7x00 HP array, there is a software called Command View SDM. This is used to manage the array. Further, it provides an "ArmServer" for array interrogation which SAM counts on for array, path, and LUN identification. Since you have a Storage Works device, chances are that SAM doesn't know how to interpret the information (I'm not 100% positive). You might look at the file pd_devinfo.tx and see if there is a similar array in that file. If so, you may be able to manually edit the file so SAM recognizes it. However, please note that if you patch or upgrade, this file can be overwritten. If you add the Volume Groups, Logical Volumes, and file systems manually, SAM may then see all the LUNS okay and it is seeing the OS and mountpoints versus trying to interrogate the array.

HTH,

Dave