configuration MSA 1500cs with hpux 11i version2

[HP_GUY]

we have received two SAN switch 4/8 , MSA 1500 cs and server rx2660 running with hpux 11i V2.
when i try ioscan -fnC disk i can not see the disk for the MSA 1500cs
please any one help me

best regards

[Srikanth.D]

We need to know how they are connected in the SAN and if any Multi-Pathing software is installed.

[GIO_6]

Hi..
unfortunately, it is hard to tell with the info provided.

Was it working before or is this a new set-up?

Since this is a MSA1000 (disk array) you will never see the disks in ioscan but the LUNs created on it.

there are many variables that could prevent the host from seeing the MSA (zoning in the switches, cables, gbics, HBAs, not proper config from the MSA1500 CLI, etc,)

please provide output of ioscan -fn and "show tech_support" from the MSA1500 in order to have a better picture.

For more info about using the CLI please go to: http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c01183955/c01183955.pdf


GIO.