Disk Enclosures
Showing results for 
Search instead for 
Did you mean: 

daisy chain 4 fc10 devices

Frequent Advisor

daisy chain 4 fc10 devices


I have 4 fc10 unit i want to connect together
as one fl port. how do i go about doing this. I want to have 40 public loop disk devices on
1 port connected to the switch.




P.S. This thread has been moved from General to Disk Array. - Hp Forum Moderator

Berislav Varga
Occasional Advisor

Re: daisy chain 4 fc10 devices

You need a FC HUB.
Connect all the fc10 units to a HUB and then one port on the hub to the switch.

If you want to gou without fchub then you need to divide the fc cables.Connect from RX on the switch to the TX on the first fc10, from RX on the first fc10 to the TX on the second fc10 and so on until you finish back on the TX on the same port on the switch where you started.
Never say never