fc60

[mohan_19]

Hi every body,

I have fc60 disk array installed in one of our N class server. Is there any command to how many total disk are attached to sc10 encloser. I can see how many luns are thre and each lun have been how many disk. But I can not see how many disk are free . I need this info to create more lun.

Regards

Mohan

[Bernhard Mueller]

Mohan,

if you mean that you see the LUNs in SAM, you should also see the free disks in SAM.

if you want to use commands, try amdsp
with -i (identify array), with -d (display disk information), with -a (all info).

to configure LUNs see amcfg

cf. man amdsp, man amcfg

Regards,
Bernhard

[Adisuria Wangsadinata_1]

Hi Mohan,

1. run 'amdsp -i' to get the array_ID
# amdsp -i [enter]

2. run 'amdsp -a {array_ID}' to get the info
# amdps -a {array_ID} [enter]

Hope this information can help you.

Thanks & Best Regards,
Adisuria Wangsadinata