Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
cancel
Showing results for 
Search instead for 
Did you mean: 

help please

me_20
Occasional Contributor

help please

hello,

i have a smart array 3200 controller in a proliant 5500 server. the array is configured as a raid 5 and no OS is installed as of yet. i would like to reconfigure the raid array before installing an OS. can this be done without a smartStart CD? and if so, how.

tony
2 REPLIES
G. Vrijhoeven
Honored Contributor

Re: help please

Hi tony,

I am afraid you need to install a bois like software for the array controller. This software can be found on the smartstart CD but it can also be found on the web.

http://h18023.www1.hp.com/support/files/server/us/index.html

Gideon

Re: help please

Hi!
When server boot on Smart Arrey message push "F8", and in raid bios config you array.