Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

how to create zone

unixuser
Advisor

how to create zone


Hi all,

i am new to san we have HP EVA 8000 SAN Storage size is 120 TB and brocade switch and HP server rx 8640 and we use Hp command view to do all task related SAN.can anyone provide me step by step to create zone.
4 REPLIES
Torsten.
Acclaimed Contributor

Re: how to create zone

You should read the switch manuals and the SAN design guide both available on hp.com.

In general, you create an alias for the HBA WWN on the switch (web interface), then pack the aliases you want into a zone and add the zone to the current configuration.

This tasks must be performed directly on the switch, not on commandview.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Sivakumar MJ._1
Respected Contributor

Re: how to create zone

Hi Check this document...
For HP Online Case Logging-->http://support.openview.hp.com/
Sivakumar MJ._1
Respected Contributor

Re: how to create zone

Hi Check this
For HP Online Case Logging-->http://support.openview.hp.com/
Sivakumar MJ._1
Respected Contributor

Re: how to create zone

Check this aswelll
For HP Online Case Logging-->http://support.openview.hp.com/