Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

how to reset MSA1000 alarms from panel ??

Gabriel Madoz
Frequent Advisor

how to reset MSA1000 alarms from panel ??

Is there any way to do this, we experimented a overheating alarm in one controller and now we have acknowledge of this and want to clear that.

Any help would be appreciated
Gabriel Madoz
4 REPLIES
IBaltay
Honored Contributor

Re: how to reset MSA1000 alarms from panel ??

Hi,
maybe you can find some usefull links in this thread:
http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1257016
the pain is one part of the reality
Uwe Zessin
Honored Contributor

Re: how to reset MSA1000 alarms from panel ??

Just press the left and right button togther on the OPC.
.
Gabriel Madoz
Frequent Advisor

Re: how to reset MSA1000 alarms from panel ??

ok, and this will reset all messages from panel? you mean maintain both buttons pressed for some seconds?

Thanks
Gabriel Madoz
skris
Trusted Contributor

Re: how to reset MSA1000 alarms from panel ??

Not all the messages will be cleared,
To clear all the messages,press all the buttons on the OCP to start the LCD self test.

During the process, you will be prompted to clear the messages.

Press the Left arrow to choose yes and messages will be cleared :)

Regards,
Shiva