Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

increase the number of LUN (up 8 LUN)

boudraa_1
Occasional Contributor

increase the number of LUN (up 8 LUN)

Dear all,
We have connected two Server (N&L) on Emc Array via (FC, Brocade).
I want to know if there is a solution to have more than 8 lun (patch,.....).
Many thanks

N?cym
unix administrator
3 REPLIES
Bill McNAMARA_1
Honored Contributor

Re: increase the number of LUN (up 8 LUN)

Your other post is here.

http://forums.itrc.hp.com/cm/QuestionAnswer/1,1150,0x869de7e60861d511abcd0090277a778c,00.html

Although relating to the brocade, perhaps this will cause further confusion on the hardware address. There is a real strange addressing mechanism unless you're in hub mode.. you need to get management s/w from software.hp.com to really consider managing devices in your san.
S/w is san manager dm / lm

Later,
Bill
It works for me (tm)
boudraa_1
Occasional Contributor

Re: increase the number of LUN (up 8 LUN)

First, many thanks.
Victor,

the type of the connection: Fiber Channel
EMC: 8430
OS:11.0
Interface:A5851A

Best
N?cym
unix administrator
Vincent Fleming
Honored Contributor

Re: increase the number of LUN (up 8 LUN)

Just an FYI: San Manager LM and DM are now OpenView Storage Allocator and OpenView Storage Node Manager (respectively).
No matter where you go, there you are.