Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

is 2dh supported on 1850r 500mhz+

Ayman Altounji
Valued Contributor

is 2dh supported on 1850r 500mhz+

I have seen conflicting reports as to whether using this Uscsi3 controller with the 4 bay Uscsi2 as found in 500mhz+ 1850r is supported. Any thoughts?

Thanks in advance
1 REPLY
Ayman Altounji
Valued Contributor

Re: is 2dh supported on 1850r 500mhz+

internal drive cage with optional 2 x 1" Ultra2/Ultra3 drive cage)
(Must be used in conjunction with the 4 x 1" Ultra2/Ultra3 Drive cage and an Ultra2/Ultra3 Controller.)

Wide Ultra2/Ultra3 SCSI Drive Cage Option Kit (2 x 1" )
(The ProLiant 1850R Pentium III Models can support up to six 1" Ultra2/Ultra3 hot plug drives on a single SCSI channel with the purchase of the optional 2 x 1" Ultra2/Ultra3 Drive Cage (388255-B21). The six drive configuration requires the purchase of an Ultra2/Ultra3 controller.) 388255-B21
Wide-Ultra SCSI-3 Drive Cage Option Kit.

The 64-bit, 66mhz PCI single channel wide ultra3 SCSI Adapter has External SCSI Connectors
68-Pin Wide Ultra2/3 SCSI, LVD Connector
Internal SCSI Connectors

68-pin Wide Ultra2/3 LVD SCSI Connector
68-pin Fast-Wide, Single Ended, SCSI Connector
50-pin narrow Fast-SCSI Connector
(The ProLiant 1850R Pentium III Models can support the same Wide-Ultra SCSI-3 drive configuration as the 6/400 & 6/450 Models with the purchase of the Wide-Ultra SCSI-3 Drive Cage Option Kit (103357-B21).)