HPE Community
Disk Enclosures
1753872 Members
7601 Online
108809 Solutions
New Discussion

migrating from 2sl to 3200 boot failure

 
Ayman Altounji
Valued Contributor

‎10-14-2001 04:00 PM

‎10-14-2001 04:00 PM

migrating from 2sl to 3200 boot failure

W2K server w/sp2. Attempted to migrate from 2sl to 3200 and system blue screened with boot device inaccessable. I thought the driver for the 3200 is the same as the 2sl. Any suggestions?
0 Kudos
Reply
1 REPLY 1
Ayman Altounji
Valued Contributor

‎10-17-2001 04:00 PM

‎10-17-2001 04:00 PM

Re: migrating from 2sl to 3200 boot failure

Have you gone into the System Configuration Utility (SCU) during POST and identified the 3200 as the new boot controller? You access the SCU by pressing F10 for the system partition. It should identify the new controller automatically and make sure you save those settings reboot.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.