Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

missing drive on va7400

vladimir_1
Frequent Advisor

missing drive on va7400

SDM shows yellow warning icon and says the array has missing drive. But in graphical view (as well as by LEDs) all drives (and other FRUs) are green.

Any guess?
Thanks
3 REPLIES
Silvino Cardoso
Occasional Visitor

Re: missing drive on va7400

Hi,

Check with armdsp -d if you have all disk in state INCLUDED.
If not you should replace the defective disk. If all are Included look look at the array logs for any other error with:
armlog -e
or
logprn -a

If you have any error call HP support and send them the logs for analyse.

Regards

Silvino
Ricardo Rocha
Valued Contributor

Re: missing drive on va7400

if you run #armdsp -a "alias"
at the end you should see the error message. it contains the location of the failed/missing disk. run also what Silvino said and call HP.

good luck,

Ricardo
"there is this old man who spent so much of his life sleeping that he is able to keep awake for the rest of his years"
vladimir_1
Frequent Advisor

Re: missing drive on va7400

armdsp -a just said there is a missing drive. But! The problem is solved by runing armformat -f.