Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

msa20 connect to Adaptec SCSI Card 39160

ashar
Occasional Advisor

msa20 connect to Adaptec SCSI Card 39160

hi i just connect my msa20 with "Adaptec SCSI Card 39160" but i get the message "HP U320/SATA BULK 1 SCSI Array Device" is there any solution to connect msa20 with adaptec 39160 ? because the connector with the scsi adapter are the same so, think i could connect with any scsi card


thank you

adhi
3 REPLIES
Torsten.
Acclaimed Contributor

Re: msa20 connect to Adaptec SCSI Card 39160

You need to connect the MSA to a smart array controller, see

http://h18000.www1.hp.com/products/quickspecs/11942_na/11942_na.HTML

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
ashar
Occasional Advisor

Re: msa20 connect to Adaptec SCSI Card 39160

hi
i already see the spec controller msa20 it said tha Smart Array 6404 could only support until 2TB for Maximum Logical Volume Size my msa20 had 250Gx12 = (approx 2.9TB) should i use msa1500 or still could use smart array 6404 ??

thank you


adhi
Víctor Cespón
Honored Contributor

Re: msa20 connect to Adaptec SCSI Card 39160

The 2 TB limit is common to most SmartArrays and MSAs. If you want a LUN bigger than 2 TB, use a MSA60 or 70 connected to a SmartArray P800 wich supports 8 Zettabytes.