Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

no Tape driver after 11i install

Gayet_3
Advisor

no Tape driver after 11i install

After re-installing 11i on my RP8400, i can't see my tape drive.
so i check the kernel in order to find if the stape driver is enable (it wasn't), i enable it and reboot. Still no tape drive :
# ioscan -fnC tape
#

any idea ? i don't think about HW problem

Note i still have an old output (before re-installing) of the ioscan -fnC tape command :
Class I H/W Path Driver S/W State H/W Type Description
===========================================================================
tape 2 1/0/10/0/0/4/1.4.0 stape CLAIMED DEVICE HP C5683A
/dev/rmt/2m /dev/rmt/2mnb /dev/rmt/c15t4d0BESTn /dev/rmt/c15t4d0DDSb
/dev/rmt/2mb /dev/rmt/c15t4d0BEST /dev/rmt/c15t4d0BESTnb /dev/rmt/c15t4d0DDSn
/dev/rmt/2mn /dev/rmt/c15t4d0BESTb /dev/rmt/c15t4d0DDS /dev/rmt/c15t4d0DDSnb
2 REPLIES
Gayet_3
Advisor

Re: no Tape driver after 11i install

sorry ... leaving DiskArray folder ... and post again in Storage>tape folder

C.
Gayet_3
Advisor

Re: no Tape driver after 11i install

posting in the Tape area ...