Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

p400 New Install Allways Rebuliding

Reuben Bauer
Occasional Visitor

p400 New Install Allways Rebuliding

I just installed a p400 sas controller with a 4 drive raid 5 setup. Shortly after I start copying files to the drive I notoice speed degration. When I check the acu utility it shows the array is rebuilding. I left this process finish before continuing. When I resume copying the problem repeats. Is this normal or may there be a problem with 1 of my drives. Nothing indicates in acu that a drive has failed.

Any help would be appreciated.
1 REPLY
PVD
Advisor

Re: p400 New Install Allways Rebuliding

You may want to run the array diagnostic utility to check for any drive issues.