Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

ra4000 config

Ron Crall_1
Occasional Visitor

ra4000 config

I have a RA4000 connected to a DL380. Array config utility 7.20.19 sees the RA4000 and can configure the array's and logical drives. Windows 2003 cannot see the logical drives.
Device manger shows the KGPSA-xx PCI Fiber Channel HBA (with adjunct driver)
What am I doing wrong?
2 REPLIES
KurtG
Regular Advisor

Re: ra4000 config

The KGPSA-xx card are "Fabric" adapterts.
I beleive the RA4000 was loop only? (I do not remeber as I did very little work on the RA4000 series). What kind of switch are you using? Can you see the hba and RA4000 connection on the switch?

Please post information about all of youre infrastructure. (I.e. server os, patchlevel, hba firmwarelevels, hba driverlevels, switch type and so on....)

KurtG
Andrzej Kowalik
Honored Contributor

Re: ra4000 config

If you can see kgpsa, i think problem is with ssp (selective storage presentation) on RA4000. From ACU you have to add host(s) to created logical disk(s).
regards,
Andrzej