read defect data on disk

[system administrator_15]

Hi
I have received a couple of messages over the last few days about on of my disks in an fc10 array,
the disk report is attached but my question is could this be to do with the I/O timeout on the disk or is the disk starting to fail.
i have run STM against it and everything reports back ok.
i would be gratefull for any help.
andy

[Massimo Bianchi]

Hi,
from the report looks like your disk is going to die.

Untill now it was able to recover defective sector, but i will open a support call to have it changed quickly.

HTH,
Massimo

[Alexander M. Ermes]

Hi there.
If that disk is mirrored, no problem.
Otherwise you should copy yur data on a replacement using dd infile=olddisk outfile=newdisk.
Rgds
Alexander M. Ermes

[Caesar_3]

Hello!

Looks like your disks gonna die very soon,
do backup for all data on them.
Do this check
dd if= of=/dev/null bs=1024k
You will see if you can read the whole disk.
If you have suport from HP connect to them that
they will replace the bad disks with new one.

Caesar