Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

sancopy incremental

Ehrler
Occasional Advisor

sancopy incremental

Hello,
I have a EMC Question.
Is it possible to make an incremental sancopy.
HP-UX 11.11 / CX700
We have testet, but the changes from the source LUN are not on the destination LUN.???
4 REPLIES
Devender Khatana
Honored Contributor

Re: sancopy incremental

Hi,

What options are using for this?

In HP arrays we have a product called business copy XP to achive this. You will have to use EMC couterpart for this there.

HTH,
Devender
Impossible itself mentions "I m possible"
Ehrler
Occasional Advisor

Re: sancopy incremental

I mean we have a config Problem.
In the Doku (EMC)I have found we must config a reserved lun to do a incremental sancopy. The Integrator mean, make a snapview and then the sancopy from snapview. ???
Regards
Ehrler
Chris Callihan_1
Frequent Advisor

Re: sancopy incremental

are both the source and destination arrays CX700's? are you mounting the destination copy to a host, or just letting it sit idle as a DR copy?
Ehrler
Occasional Advisor

Re: sancopy incremental

Hello,

the source and the destination are both on CX700. (one Array)

The problem is, the source and the destination LUN are activ lun's.
From time to time the developer need a refresh from the source lun. With SANCOPY, the destination lun are not update correct with incremental SANCOPY.
The Integrater mean, the destination lun has no track-file to protocol the changes.
No way ??

Best regards
Ehrler