Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

sc-10 config under A5158A and fc-60

Ross Hansen
Occasional Advisor

sc-10 config under A5158A and fc-60

I'm having a problem with systems not reporting disks under fiber channel adaptors. Ex... I have an N-Class with a A5158A attached to an fc-60, under which I have an sc-10. I need to be able to view the sc-10 configuration. It's not showing up under stm info or ioscan. I've attached the ioscan from the machine - the A5158A initially shows up at 0/8/0/0. Is there some reason I can't view the sc-10 config?
4 REPLIES
Eugeny Brychkov
Honored Contributor

Re: sc-10 config under A5158A and fc-60

Host sees controller only, no LUNs (/dev/rscsi/c4t5d0). Host identified FC60 incorrectly and uses driver fcpdev instead of fcparray.
Where this FC60 was previously connected? To NT or w2k system? Which firmware does it have? Which product number? Is it indicating any faults if looking to the front leds of each controller?
For information please refer to docs at http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&locale=en_US&docIndexId=179111&taskId=115&prodTypeId=12169&prodSeriesId=33734
Eugeny
Helen French
Honored Contributor

Re: sc-10 config under A5158A and fc-60

I remember an initialization issue with SC-10, fc-60 and N Class server. If that's the case, what you have to do is to start the disk arrays (fc-60 and sc-10) well before you start the N class server. If you read the manual came along with the FC60, this message is noted on the front pages.



Once the initialization is okay, you will be able to see the disks through SAM and you can configure it.
Life is a promise, fulfill it!
Eugeny Brychkov
Honored Contributor

Re: sc-10 config under A5158A and fc-60

Shiju,
this issue you're talking about... I guess this happens because on bootup, when AM60Srvr does not detect FC60, it simply does not start and that's why SAM does not work correctly with FC60 in this case.
Anyway, it does not matter which sequence is used, LUNs of FC60 should appear in the ioscan output
Eugeny
Ross Hansen
Occasional Advisor

Re: sc-10 config under A5158A and fc-60

Thanks the problem has been resolved!