HPE Community
Disk Enclosures
1753819 Members
8161 Online
108805 Solutions
New Discussion

stopped amirdmon, will I still see failed drive messages?

 
Darryl Reynolds
New Member

‎02-07-2002 10:28 AM

‎02-07-2002 10:28 AM

stopped amirdmon, will I still see failed drive messages?

Running SCO Openserver 5.0.6 on e800 with netraid adapter. Have 3 drives in raid level 5. Because the raid monitoring program (amirdmon) causes a huge performance drop, I have stopped it. My question is: Without amirdmon running, will I see any type of warning message if a drive fails?
0 Kudos
Reply
1 REPLY 1
Marino Meloni_1
Honored Contributor

‎02-08-2002 12:36 AM

‎02-08-2002 12:36 AM

Re: stopped amirdmon, will I still see failed drive messages?

hi
I didn't know the response, but if your netraid card have it, you can enable allarm, if a drive go offline, you will heard a continus beep until the hdd is replaced and the raid rebuilded.
you can enable it in Ctrl M bios utility or starting Megamgr under sco
bye
marino
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.