storageworks 4354

[deheugden]

guys,

am looking for a manual to set up and configure the 4354, anyone who can help me with that?

thanks in advance

P.S. This thread has been moved from  Storage>General to  Disk Array. -HP Forum Moderator

[giladzzz]

Hi

look at this post

http://h30499.www3.hp.com/t5/Disk-Array/Needed-User-manuals-for-Compaq-StorageWorks-4354-and-4314/td-p/3518242

Regards

[deheugden]

Hi,

Many thanks for your reply. Did that, but those links dont point to the necessary documentation.

Regards,

[deheugden]

ok, got it a little bit working. Adaptec card is recognized(used the w2008r2 driver from adaptec), i can get into the adaptecs bios but the harddisks(11 are not recognized). Dont know if the other 3 empty slots needs to be filled with something.

Also, the lights of the 11 discs are not blinking on the unit.

Anyone??

[Torsten.]

What do you want to do with this old box? It must be more than 10 years old now.

Supported controllers are listed here:

http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04283713

A single disk today has more capacity than this whole box.

BTW, if I google the product, I get manuals within the first hits.

[deheugden]

many thanks for the reply. The purpose is just form learning, not for real life use offcourse.

2nd, i googled also but no info about what could be the problem. Why the discs aren't enabled.

[Torsten.]

Dou you have a dual bus or single bus controller in the chassis? What scsi controller do you use?