HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

unassigning logical drives

 
John_438
Contributor

unassigning logical drives

Is it possible to unassign logical drives from an array??
Perfection is never making the same mistake twice...
4 REPLIES
Michael Steele_2
Honored Contributor

Re: unassigning logical drives

What is the array and what management software are you using?
Support Fatherhood - Stop Family Law
John_438
Contributor

Re: unassigning logical drives

not sure what you mean by "what array" but i'm using an MSA1000 controller, array A and the sofware is the compaq config utility...hope that's enough info....thanks
Perfection is never making the same mistake twice...
Janine Bertolo
Honored Contributor

Re: unassigning logical drives

Hi John;

Yes, you can delete a logical drive from an array.

This action would be data-destructive, and would not allow you to physically remove a hard drive from the RAID5 set.

Cheers,

Janine
To get results you've never had before, try something you've never tried before.
Janine Bertolo
Honored Contributor

Re: unassigning logical drives

Hi John;

Yes, you can delete a logical drive from an array.

This action would be data-destructive, and would not allow you to physically remove a hard drive from the RAID5 set.

Cheers,

Janine
To get results you've never had before, try something you've never tried before.