Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

va7400 find out the raid level of LUN

SOLVED
Go to solution
kholikt
Super Advisor

va7400 find out the raid level of LUN

Is there any way to find out each LUN specific configuration? I would like to know for each LUN whether they are using Raid 1, 3 or 5. My current RAID level is set to AutoRAID.
abc
3 REPLIES
Eugeny Brychkov
Honored Contributor
Solution

Re: va7400 find out the raid level of LUN

If you would set VA up to work in RAID1+0 level then you can be sure it will work using this RAID level. But in Autoraid mode VA selects RAID level automatically by its settings, data size, data stream size, data usage etc. There are only RAID5DP (dual parity) and RAID1+0 implemented in VA (no RAID3). Most 'active' data are hold in the RAID1+0 mode, but less active in RAID5 mode.
Eugeny
Roger_22
Trusted Contributor

Re: va7400 find out the raid level of LUN

The armperf LUN output will provide the capacity of each LUN to the RAID level.
harry d brown jr
Honored Contributor

Re: va7400 find out the raid level of LUN

This is what your profile says:

This member has assigned points to 83 of 316 responses to his/her questions.

You can correct this by searching through your previous questions:
http://forums.itrc.hp.com/cm/TopSolutions/1,,CA610806!1!questions,00.html

live free or die
harry
Live Free or Die