Disk Enclosures
Showing results for 
Search instead for 
Did you mean: 

virtual array info from ioscan/stm info

Go to solution
Ross Hansen
Occasional Advisor

virtual array info from ioscan/stm info

is there anyway to get the physical disk contenets of virtual arrays - I can't get the system to report on anything past the fibre connection?

James A. Donovan
Honored Contributor

Re: virtual array info from ioscan/stm info

To get information on the physical configuration of your VA array, you'll need to use the CommandView utilities.

"armdsp -a " will show the entire configuration

---- The default syntax for identifying the is:
[:] where is used to access the array
on host . can be either a DNS name or the IP
address of the host, and can either be the Serial Number,
Alias Name, World Wide Name or the Device Path of the array.
Remember, wherever you go, there you are...