Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

wrong state of Array Controller in System Management Homepage

Th.Müller
Occasional Contributor

wrong state of Array Controller in System Management Homepage

after a hard reset of a DL740 G1 during write access shows the SMH a degraded ( yellow ) state of the SA 641. This issue can be repeated on several different systems like ML370 G3 with SA 5300.
The support means that only a reboot sets the controller state to green. Can I set the "green state" without reboot ?
2 REPLIES
Glueck Gerald
Occasional Advisor

Re: wrong state of Array Controller in System Management Homepage

Hi,

Maybe restarting the HP Systems Management Homepage service and the HP Insight Management Agents service would solve the problem.

Greetings

Gerald
The Spartan
Trusted Contributor

Re: wrong state of Array Controller in System Management Homepage

Are the -
PSP, driver, firmware updated?
restart of the services, reboot post the aforesaid updates should resolve the issue.

If you are keen to win, you should be willing to lose.