Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

xp512 array groups

SOLVED
Go to solution
James Hicks
Contributor

xp512 array groups

My customer has an xp512 with one DKU
We're going to configure 2 hotspares at 48GB and 73GB.

What is the number of array groups I can have.

Thanks in advance
4 REPLIES
Dave Wherry
Esteemed Contributor
Solution

Re: xp512 array groups

I have not been able to find this information. I can tell you about the XP256 though.
One DKU holds 64 disks, or 16 disk groups. Once you add a hot spare that takes up one of the disk groups. You can mix different size spares in that "group" You will use 2 of the 4 drive bays in that group, leaving 2 for other spares.
This leaves you 15 drive bays, or cannisters (cans) for data disks.
The XP256 goes up to 256 disks by using 4 DKU's - 4 * 64. The XP512 can have 512 disks. I'm not sure if they do that by doubling the number of DKU's or increasing the number of disks that can go in a DKU.
If your customer already has the XP on-site simply open the door and count the cans. Then divide by 4.
Dave Wherry
Esteemed Contributor

Re: xp512 array groups

James,
I got some more information today. The XP512 can have up to 96 disks in a DKU. They are putting a larger number of smaller form factor drives in the same size cabinet. You should be able to get up to 24 disk arrays in a single cabinet.
They have also added 2 more cabinets to the configuration for a total of 6. That's a total of 576 disks. You lose capacity though when you add hot spares.
Vincent Fleming
Honored Contributor

Re: xp512 array groups

Actually, the R1 DKU (first right side disk cabinet) can hold 23 array groups, as one of the array group slots is reserved for spares.

The R2 (second right side cabinet) can hold 24 array groups, as can L1 and L2 (the first two left side cabinets).

The R3 and L3 cabinets (3rd cabinets on the left and right) hold 64 drives instead of the 96 that the R1, R2, L1, L2 cabinet hold. This makes for 16 array groups.

So, R1, R2, L1, L2 at 96 disks + R3, L3 at 64 disks = a total of 512 drives, including spares.
No matter where you go, there you are.
Peter Mattei
Honored Contributor

Re: xp512 array groups

As Vincent explained, there can be up to 512 disk mechs in a XP512. See the attached drawing I made for clarification.
8 drives are exclusively reserved for hot spares (the yellow ones). So 504 drives can be used for operation.
I you want more spares, you can have up to 16 total, taking 8 off the operational ones.

Regards
Peter
I love storage