Operating System - VMware
1748003 Members
4476 Online
108757 Solutions
New Discussion юеВ

Monitoring HP P410 controller on ESX 4 update 1

 
Jarek Maciejewski
New Member

Monitoring HP P410 controller on ESX 4 update 1

Hi

I'm using vSphere 4.0 update 1 on HP DL180 G6 server. Server have P410/512MB + BBWC controller for local disk storage.

Controller and RAID works without problem but there is no controller status in Configuration->Health Status->HP Proliant DL180 G6->Storage.

It there any driver which I have to install to see P410 controller in 'Health Status' ?

Before I used ESX on Fujitsu servers where MegaRAID controller and Hard Disks monitoring were present in 'Health Status' without any additional drivers.

Jarek
2 REPLIES 2
wobbe
Respected Contributor

Re: Monitoring HP P410 controller on ESX 4 update 1

Unfortunatly your server is not supported for ESXi.
http://h20338.www2.hp.com/enterprise/us/en/servers/4x-servers.html
luka_o
New Member

Re: Monitoring HP P410 controller on ESX 4 update 1

Here is the solution, its the problem that DL series dont have full iLO support, and that hangs ESXi.

- http://forum.lettronics.com/forums/thread/1273.aspx
- http://www.techhead.co.uk/vmware-esxi-purple-screen-of-death-on-hp-proliant-ml110-or-ml115

Another 2 nights of sleep for 5 minute of work solution... :)

best regards,