HPE Community
Operating System - VMware
1752672 Members
6021 Online
108789 Solutions
New Discussion

ESXi 4 LUN's

 
Michael Grech
Advisor

‎10-01-2009 04:30 AM

‎10-01-2009 04:30 AM

ESXi 4 LUN's

I have a DL360 G5 with a p800 controller. That is attached to an MSA2000 drive enclosure populated with 25 - 146GB drives. I partitioned the MSA2000 into 3 logical drives in addition to the logical drive in the GL360 giving me 4 logical drives. When configuring Storage in ESXi4 I noticed all the logical drives were LUN 0. I need to have other LUN ID's in VMWare because of the 2TB limit. How do I get the other logical drives to have other LUN ID numbers.
0 Kudos
Reply
1 REPLY 1
Uwe Zessin
Honored Contributor

‎10-01-2009 10:32 AM

‎10-01-2009 10:32 AM

Re: ESXi 4 LUN's

I've asked for some information in your other thread:
http://forums.itrc.hp.com/service/forums/questionanswer.do?threadId=1375562

> How do I get the other logical drives to have other LUN ID numbers.

Maybe the SAS adapter creates different targets for each volume... Don't know - have not worked with one yet.

ESX 4 is still limited to 2 TeraByte LUNs - independend from the LUN address.
.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.