cancel
Showing results for 
Search instead for 
Did you mean: 

ESXi 4 LUN's

ESXi 4 LUN's

I have a DL360 G5 with a p800 controller. That is attached to an MSA2000 drive enclosure populated with 25 - 146GB drives. I partitioned the MSA2000 into 3 logical drives in addition to the logical drive in the GL360 giving me 4 logical drives. When configuring Storage in ESXi4 I noticed all the logical drives were LUN 0. I need to have other LUN ID's in VMWare because of the 2TB limit. How do I get the other logical drives to have other LUN ID numbers.
1 REPLY
Uwe Zessin
Honored Contributor

Re: ESXi 4 LUN's

I've asked for some information in your other thread:
http://forums.itrc.hp.com/service/forums/questionanswer.do?threadId=1375562

> How do I get the other logical drives to have other LUN ID numbers.

Maybe the SAS adapter creates different targets for each volume... Don't know - have not worked with one yet.

ESX 4 is still limited to 2 TeraByte LUNs - independend from the LUN address.
.