EVA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Battery cache error after replacement in EVA8400

 
MarcoLima
Occasional Visitor

Battery cache error after replacement in EVA8400

Dear,

I am trying to replace 2 bad Battery caches in a production environment. After several attempts of replace per new battery parts, Both news parts come dirctely in fault state after replace procedure. I have tryed to replace the Controller Enclosure but problem persists.

Does anyone have any idea / document to solve this problem?

Thanks a lot,

Marco Lima

3 REPLIES 3
giladzzz
Honored Contributor

Re: Battery cache error after replacement in EVA8400

Hi

a cache battery has logic on it once it is marked as bad you can not reset this condition even if the battery is good,

Regards

 

MarcoLima
Occasional Visitor

Re: Battery cache error after replacement in EVA8400

Then I will have a battery bad forever?????? I am replacing per new parts and fault state do not solved. 

PZel
Valued Contributor

Re: Battery cache error after replacement in EVA8400

I correct procedure must be:

1) Order new batteries

2) Take the bad batteries out (on-line)

3) Wait minimal 20 seconds but maxium 2 minuts (so 30 seconds) !

4) Press all the new batteries in place (on-line)

PZ