EVA 5000 Command View do not show at the General Tab the Controller Cache

[endrissa]

Hi!

I had to replace both HSV110 Controllers of an EVA 5000 System as the contacts of the Cache Batteries has been oxidated.

At first I had replaced Controller B against an other one. The System where stable and all works fine.

Then I replaced Controller A against an other one. The Controller joined the system and all looks fine.

Now I have at the Command View 9.1 the problem, that I can not see at the General Tab the

Controller Cache

Data Cache

Total Cache

I have added this part at the Attachments.

The Controller Firmware Version are 4100.

Each Controller looks fine at the Command View, but I have a bad feeling about the problem with the Command View.

Does anyone had a similar problem and where able to fix it?

[Johan Guldmyr]

Hi, have you tried to restart CV or the controllers?

If not, maybe between CV 9.1 and CV 9.4 there is a fix for this.
If you are afraid of something bad going on, open a case with HP so they can go through the logs. You can also take a look yourself (in the controller event logs) to see if it looks like something bad might be going on.

[endrissa · Accepted solution]

The Controllers I had but the Command View Service I don't

I have stopped and restarted the Service and now all looks fine.

Thx.