HPE EVA Storage
1753569 Members
6159 Online
108796 Solutions
New Discussion

EVA400 ORACLE ASM CLUSTER

 
Eduardo Andrade
Occasional Advisor

EVA400 ORACLE ASM CLUSTER

Ho gurus,
Im have a two servers rp3440 witch hpux 11.11 v1,eva 4000 with secure path.
I don´t have servie guard ,im triying install Oracle 10g r2 in cluster but i don't undestand
which path use to crate disks. In the secure path i have 4 paths actives.
3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: EVA400 ORACLE ASM CLUSTER

With secure path you should have a single path to each vdisk (LUN).
Use
ioscan -fn
and
spmgr display
for more information.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Eduardo Andrade
Occasional Advisor

Re: EVA400 ORACLE ASM CLUSTER

The autpath display show the next path
Virtual Device File : /hpap/dsk/hpap0

For use this one with oracle rac use the raw device?? /hpap/rdsk/hpap0
Torsten.
Acclaimed Contributor

Re: EVA400 ORACLE ASM CLUSTER

I did expect a different naming but according to your attachment you have to use

/hpap/dsk/hpap0
and
/hpap/rdsk/hpap0
as your virtual pathes.
You probably need to create some LVM structures on this device, but I'm not the db expert.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!