EVA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

EVA4400 - P6550 Command View 10.3 Parser File

 
msingh_K1
Occasional Contributor

EVA4400 - P6550 Command View 10.3 Parser File

Hi all,

After the firmware upgrade form 11000x to 

Controller hardware: HSV300  XCS version: 11300000  XCS build: CR2306lep 

Server based management and installed with CV-EVA 10.3

Under the controller event - it's asking for correct parser file

 

Event recroded: 

Parsefile for current firmware version not found. Upload correct parse file. CR2306

 

Does anyone have got the handy?

2 REPLIES 2
giladzzz
Honored Contributor

Re: EVA4400 - P6550 Command View 10.3 Parser File

Hi

the parse file is part of the firmware file if you did the upgrade with the same command view server

it should have been installed. if not you can try running the installation again.

regards

Highlighted
NSharon
Frequent Advisor

Re: EVA4400 - P6550 Command View 10.3 Parser File

If the correct EVA event parser file is not available to Command View, A text parse file is provided with each version of EVA firmware. Each release of EVA firmware includes its own unique text parse file in the superfile. The parse file is extracted by Command View EVA for its use in formatting and displaying event logs for these events.

 

You could try this :

 

Copy and paste the appropriate parse file for the VCS / XCS firmware into the directory “C:\Program Files\Hewlett-Packard\Sanworks\Element Manager for StorageWorks HSV\events”
Restart the command view service(HP Command View EVA) from the services management console.

 

Copy the appropriate parse file from the EVA firmware kit to a folder on the workstation that is used for browsing. From Command View EVA, select the following:
-View Events
-Controller Event Log
-Send Parse File
Click on “Browse” to the hard drive folder where the parse file is located, and then click the "Send Parse File" button.

I work for HP.

If you find my Post Useful please click on the thumbs up!