1748202 Members
2985 Online
108759 Solutions
New Discussion юеВ

Re: EVA4400 error

 
acec
Occasional Advisor

EVA4400 error

did anybody enccountered the soft diag error in eva4400?
6 REPLIES 6
Uwe Zessin
Honored Contributor

Re: EVA4400 error

Not yet...
Try to reboot the system, or maybe controller 1 first and then controller 2 to see if the error sticks.
If yes, open a call with HP.
.
acec
Occasional Advisor

Re: EVA4400 error

is this because of license?i havent installed all the license for eva4400.
Uwe Zessin
Honored Contributor

Re: EVA4400 error

No, it has nothing to do with licensing.

Can you supply a screenshot?
(small .JPG file, please don't embedd in Word document)
.
IBaltay
Honored Contributor

Re: EVA4400 error

Hi,
some previous threads have covered this topic (though in other EVAs) e.g.
http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1261170
the pain is one part of the reality
acec
Occasional Advisor

Re: EVA4400 error

no screen shot,but the storage is on production and dont have problem.i just notice that when i click on the hsv controller i saw this attention: initialized and the soft diag error.i also test the redundancy test of all the components and no problem encountered.
Uwe Zessin
Honored Contributor

Re: EVA4400 error

If you are talking about the [Check Redundancy] button on the Storage System Properties page...

I guess the response was: "All of your Vdisk data is protected by __redundant disk drive__ storage." (emphasis mine)

It means that full RAID protection is in effect - it does not say anything about hardware redundancy like redundant controllers, redundant paths, ...
.