HPE Community
HPE EVA Storage
1753769 Members
5027 Online
54796 Solutions
New Discussion

Re: HP / Brocade Fibre Switch 4/16 Perf Monitoring

 
ben horan
Frequent Advisor

‎03-24-2009 08:10 AM

‎03-24-2009 08:10 AM

HP / Brocade Fibre Switch 4/16 Perf Monitoring

I've set the timeout on our Brocade Fibre Switch to zero. However when I load the inbuilt Performance Monitor from the Web Tools and run some graphs they timeout when the graphs reach 120 mins. I then need to log back in and re-create all graphs. Is there any way to prevent this from happening?

On our older switches when the graphs reach 120 minutes they restart from zero and can be left to run all day.

I would like to have a few graphs up on our managment console to visually monitor performance.
0 Kudos
Reply
1 REPLY 1
Ivan Ferreira
Honored Contributor

‎03-24-2009 11:53 AM

‎03-24-2009 11:53 AM

Re: HP / Brocade Fibre Switch 4/16 Perf Monitoring

You could use cacti monitoring tool. There is a template for brocade switches.

http://www.cacti.net/
http://forums.cacti.net/about6346.html
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.