HPE EVA Storage
1752587 Members
4025 Online
108788 Solutions
New Discussion юеВ

HP P2000 and Windows Server 2008 R2 Problem

 
iHPi
Occasional Contributor

HP P2000 and Windows Server 2008 R2 Problem

hi all

when i mapping a volume from my P2000 g3 to a server 2008 Host with 2 port HBA , it appears twice.

what am i doing wrong?

thanks.

4 REPLIES 4
Torsten.
Acclaimed Contributor

Re: HP P2000 and Windows Server 2008 R2 Problem

Missing MPIO?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Rajiv
HPE Pro

Re: HP P2000 and Windows Server 2008 R2 Problem

have you mapped it to both the ports, if yes then it should appear twice. If you do not have MPIO installed then it should be visible 4 times.

 

Thanks & Regards,

Rajiv

I work for HPE

Accept or Kudo

iHPi
Occasional Contributor

Re: HP P2000 and Windows Server 2008 R2 Problem

hi

yes, i mapped it to both ports and i dont installed MPIO !! , if i install MPIO the problem is solve ?

Torsten.
Acclaimed Contributor

Re: HP P2000 and Windows Server 2008 R2 Problem

Yes, after this the system will be multipath aware.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!