HP P6000 Command View with Apache 2.2

[EvgeniyK]

Hello.

Please, tell me, where to find a description install Command View 10.2 with Apache 2.2?

Thanks.

[Rajiv]

Hello,

Please confirm if you are looking for the P6000 Command view Install Guide.

If yes then you'll find the install guide here:

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c03472908/c03472908.pdf

Thanks & Regards,

Rajiv

[EvgeniyK]

Hello, Rajiv.

Thanks for reply. But in P6000 Command view Install Guide no description install and configure Apache2 (http://www.apache.org/).

How install custom SSL certificate on Command View server?

Thanks.

[EvgeniyK]

there is a description "Apache Web Server SSL Configuration for Command View application White Paper" http://h20000.www2.hp.com/bc/docs/support/SupportManual/lpg29317/lpg29317.pdf?jumpid=reg_R1002_USEN

but it is for earlier versions. Maybe there is such a description for the latest versions of HP Command View

[Rajiv]

I am afraid there is no similar document available for the later versions.

Could you let me know what exactly are you looking for from an SSL Configuration point.

The later versions of Command view EVA are enabled for SSL and have a signed certificate readily available for use.

Thanks & Regards,

Rajiv

[EvgeniyK]

We just want to open HP CV from web browser and see our certificates.

Thanks

[Rajiv]

So if my understanding is correct you need to setup your own certificate on Command view Server.

To my knowledge this option was not available previously, I can double check if this option is available and report back.

[EvgeniyK]

Thanks for the help.

Yes, I need to setup my own certificate on Command view Server. But I have no idea how this can be done without other software (such as a Web server Apache).

Thanks

Best Regards

Evgeniy.

[EvgeniyK]

Hello.

So, is there a way to setup your own certificate on Command View Server.

Thanks.

[Rajiv]

I'm afraid it is not good news. I have checked again and with the current setup options a customized server certificate is not available for Command view Server.

Thanks & Regards,

Rajiv