HSV340 SCSI Array Device driver

[lucky72]

HI,

i have some new hardware found on my system after I installed the P6000 it calls HSV340 SCSI Array Device I am searching the curent driver for that.

System: W2003 R2

 Smart Array E200I controller; Qlogic Fiber Channel Apapter and Multi Path Support are installed only the HSV340 SCSI Array Device are not curently installed.

I dont find any kind of link where i can donwload only the driver.

[Johan Guldmyr]

Hello,

are both MPIO and DSM installed?

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=421494&lang=en&cc=us&prodTypeId=18964&prodSeriesId=421492&taskId=135

[giladzzz]

Hi

Basically the driver is part of the HBA installation you might have to reinstall a newer version

also you need to install MPIO 4.02

for windows the HSV340 is just an inf file it's not important but it's annoying

the inf file is part of the HBA driver inside a file SACDaa.inf

Regards

[lucky72]

HI,

I have installed driver pack:

HP MPIO Full Featured DSM for P6x00

family of Disk Arrays 4.02.00

there is included DSM and MPIO, I have reinstalled the driver but it is the same issue.

HSV340 SCSI Array Device are not curently installed.

[giladzzz]

Hi

Try extracting the driver and pointing the device to SACDaa.inf file

if this installs the driver than copy the file to windows installation directory

in system32\etc\drivers

Regards