I have HPE P6350 need to upgrade its firware

[HarnekSingh]

I have HPE P6350 need to upgrade its firware . is i nned to update is controler software or only management module is enogh to upgrade its have HP P6000 command View 10.1 ABF

while i doenloaed i got two files  cveva1038.zip (106 MB) and T5494-10564.zip (54 MB) not got confues which one is reqiored . or any one can assist me on this 

Thanks 

[Cali]

Hi HarnekSingh,

both are not the Controller Firmware.

veva1038.zip (106 MB) is the Management Console Software Installed on the Windows Server (SBM).

T5494-10564.zip (54 MB) is the Management Software inside the Storage (ABM).

For the P6300 you need the XCS Software, ist is a File like 340_360_11300000.SSS with 10MB.
But there is no Public Download, you need an active Support contract.

Cali

[HarnekSingh]

Thanks for your reply . Resently i have got FTP vulerability . i heaving ftp/ftp username and password with my to controller .

can you help for chnagint the password or disabling this FTP . Mine server is HP EVA p6000 ABM .

Thanks

[Cali]

Search for this User Manual: HP P63x0/P65x0 Enterprise Virtual Array User Guide

Inside look for access to the MEZ (iSCSI) Modul.

See Section C:

MEZ75 (admin) #> set system
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so.
FTP (0=Enable, 1=Disable) [Enabled ]