HPE Community
HPE EVA Storage
1753442 Members
4797 Online
108794 Solutions
New Discussion

MSA1000 active/active with RHEL 5.1

 
Ralf Buchhold
Regular Advisor

‎02-19-2008 08:30 AM

‎02-19-2008 08:30 AM

MSA1000 active/active with RHEL 5.1

Hello

I use two MSA 1000 with 2 x 7 lun´s in an active/active configuration with 2 servers
and 2 san adapters (qlogic)

I think the device adresses are: /dev/sd...
where can I see which dev-adress is from which server ?

Please help me
Thanks
Ralf
0 Kudos
Reply
1 REPLY 1
Rob Leadbeater
Honored Contributor

‎02-19-2008 01:07 PM

‎02-19-2008 01:07 PM

Re: MSA1000 active/active with RHEL 5.1

Hi Ralf,

Try looking in the output of dmesg.

# dmesg | grep sd

would be a good idea. If you've installed HP's version of the QLogic drivers then you should have the fibreutils rpm installed. If so, then this command should also be useful:

# lssd

Cheers,

Rob
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.