EVA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

MSA1000 active/active with RHEL 5.1

 
Highlighted
Ralf Buchhold
Regular Advisor

MSA1000 active/active with RHEL 5.1

Hello

I use two MSA 1000 with 2 x 7 lun´s in an active/active configuration with 2 servers
and 2 san adapters (qlogic)

I think the device adresses are: /dev/sd...
where can I see which dev-adress is from which server ?

Please help me
Thanks
Ralf
1 REPLY 1
Highlighted
Rob Leadbeater
Honored Contributor

Re: MSA1000 active/active with RHEL 5.1

Hi Ralf,

Try looking in the output of dmesg.

# dmesg | grep sd

would be a good idea. If you've installed HP's version of the QLogic drivers then you should have the fibreutils rpm installed. If so, then this command should also be useful:

# lssd

Cheers,

Rob